:: Generated By JQueryForm.Com

High Altitude Project Submission Form

Launch

Launch Day

Day 1

Day 2

Day 3

Launch Window

6:00 am to 10:00 am

10:00 am to 2:00pm

2:00 pm to 6:00 pm

Primary Contact Name

Primary Contact Email

Affiliated Club

Flyers' Names, addresses, TRA numbers and Levels.

Rocket Details

Project / Rocket Name

Kit name (or scratch built)

Project's Web Page

Project description

Total Length

Diameter (s)

Weight without motors

Weight with motors

Drogue chute / details

Main chute(s) / details

Deployment method and charges

Estimated Recovery Area

Electronic Details

Please specify any special frequency (telemetry or otherwise) that you might need reserved for your flight.

Initial Thrust (lbs)

Thrust to weight ratio

Additional details or Links

Main Motor(s) details: Number, Manufacturer, Designation, Delay Propellant Weight, Total Impulse

Second Stage Motor(s) details: Number, Manufacturer, Designation, Delay Propellant Weight, Total Impulse

TOTAL INSTALLED Propellant Weight / Impulse N-S

Describe each EX Motor: diameter, designation (J200, etc.), type and number of grains, propellant description, anticipated pressure, etc. Motors of less than 10240 N-s may be described very briefly. For larger motors, a printout from a motor modeling program is expected. Additional information (casing wall thickness, specific propellant formulation, etc.) is also expected for such motors.

Launch Support Requirements

Rail/Rod; length, other launch system details

Will you need a ladder or any other non-standard equipment to be provided?

Motor ignition description and sequence (if applicable)

Simulation Data: Results from (data should be included from each program or simulation actually used)

Cd (coefficient of drag)

Stability margin (calibers of stability)

Velocity (ft/s): At top of launcher

Maximum Velocity

Maximum altitude (ft)

Will staging occur at or greater than Mach 1.0?

Yes

No

Not applicable

Upload Simulation Data (please .ZIP if it is multiple files)

Submit Project

Submission must be 30 days in advance of launch

Notes:

- Submission of this form does not constitute approval
- You will be CC:ed on the submitted project data.
- You will be contacted once approval is granted.
- If you are not contacted within 7 days, please contact AeroPac's Webmaster.
- If the flight simms to over 50,000 foot you also need approval from the Tripoli Class 3 committee (yes! even though it's a Class 2 rocket!)

All the supplied information is true to the best of my knowledge.

Your form has been submitted. Thank You!